YL-600(S)(TWS-600(S)) 三缸压裂柱塞泵 Triplex Plunger Pump(frac pump)

 

 

用途:use YL-600(S)(TWS-600(S))柱塞泵是一种新型卧式单作用、偏置式、往复三缸柱塞泵。它由三部分:动力端、减速箱、液力端组成。它的最大制动马力为 600BHP(450kw)该泵具有体积小、功率大、压力高、流量大等优点。 YL-600(S)(TWS-600(S))柱塞泵用于间断油井工作中,如:酸化、固井、压裂、封井等作业。是高压力固井的首选。

YL-600(S)(TWS-600(S))horizontal piston pump is a new single role, bias type, reciprocating triplex plunger pump. It consists of three parts: power side, slow down boxes, hydraulic components side. It is the biggest brake horsepower to 600BHP (450KW) of the pump with small size, power, and high pressure, flow, etc. YL-600(S)(TWS-600(S))intermittent piston pump for oil well work, such as: acidification, cementing, fracturing, etc.. cover well, operation. Is a high-pressure piston pump of choice for well cementing.

 

最大制动马力:Maximum brake horsepower 600BHP (450KW)
最大负载:Maximum load 100,000 LBS(43.360kg)
冲程:Stroke 6 in(152.4mm)
传动比:Transmission ratio 4.6:1
长度:length 50.25 in(1276mm)
宽:width 52.93 in(1344mm)
高: high 23.88 in(607mm)
净重(近似):weight (nearly) 4,600 LBS(2086kg)

 

YL-600(S)(TWS-600(S))柱塞泵工作特性数据表 Characteristies of Plunger Pump Date Sheet (间断性作业,基于 90%的机械效率和 100%的容积率) Intermittent operation, Based on 90% of the mechanical efficiency and 100% of the floor area ratio

 

柱塞直径 >plunger 每转排量 >Output 不同冲次和转速下的排量和压力>(冲次>/小齿轮转速>) DISPLACEMENT AT PUMP STROKES PER MINUTE/PINION RPM
>dia. >PER REV >50/230 >120/552 >200/920 >300/1380 >450/2070
英寸 >Inch (mm) 加仑>/冲 >Gal/rev (升>/冲>) Liter/rev 加仑>/分 >GPM (升>/分>) (LPM) >PSI (Mpa) 加仑>/分 >GPM (升>/分>) (LPM) >PSI (Mpa) 加仑>/分 >GPM (升>/分>) (LPM) >PSI (Mpa) 加仑>/分 >GPM (升>/分>) (LPM) >PSI (Mpa) 加仑>/分 >GPM (升>/分>) (LPM) >PSI (Mpa)
>2-1/2” (63.5) >0.38 (1.4) >19 (72) >20372 (143.6) >46 (174) >20165 (142.1) >76 (290) >12099 (85.3) >115 (434) >8066 (56.8) >172 (651) >5377 (37.9)
>2-3/4 (69.9) >0.46 (1.7) >23 (88 ) >16845 (118.6 ) >56 (210 ) >16665 (117.4 ) >93 (350 ) >9999 (70.5 ) >139 (526 ) >6666 ( 47.0) >208 (788 ) >4440 (31.3 )
>3” (76.2) >0.55 (2.1) >28 (104) >14147 (97.7) >66 (250) >14003 (96.7) >110 (417) >8402 (58.0) >165 (625) >5,601 (38.7) >248 (938) >3,738 (25.8)
>31/2” (88.9) >0.75 (2.8) >37 (142) >10394 (71.7) >90 (341) >10288 (71.1) >150 (568) >6173 (42.6) >225 (851) >4,115 (28.4) >337 (1277) >2,744 (18.9)
>4” (101.6) >0.98 (3.7) >49 (185) >7958 (50.0) >118 (445) >7877 (54.4) >196 (741) >4726 (32.6) >294 (1112) >3,151 (21.8) >441 (1668) >2,100 (14.5)
>41/2” (114.3) >1.24 (4.7) >62 (235) >6288 (43.4) >149 (563) >6224 (43.0) >248 (938) >3734 (25.8) >372 (1407) >2,489 (17.2) >558 (2111) >1,660 (11.5)
输入功率:制动马力 Input power: BHP(kw) >253(188) >600(448) >600(448) >600(448) >600(448)

 

特点说明 Characteristics Description 

1: 该泵减速器有 17个安装位置,使它更方便的适应不同的驱动路线。
2: 一种泵头体可以选配不同尺寸的柱塞及密封总成形成可互换的系列泵 (2-1/2”泵 2-3/4”泵 3-1/2”泵 4”泵 4--  1/2”泵)从而满足不同的压力和排量要求。
3:可任意选择盘根组件、阀总成、排出法兰、吸入管汇等,以适应和满足不同介质、不同环境的要求。
4: 采用偏置式结构,使泵的体积减小、重量减轻。
5: 主要部件:轴承、柱塞、密封件、曲轴瓦、弹簧,都采用进口件。

1.Reducer of the pump is installed in 17 locations, making it more convenient to adapt to different driving routes.

2.Pump head can be a body matching the columns of different sizes and seal plug the total layer, forming a series of interchangeable pump(2-1/2”pump ,2-3/4”pump ,3” pump ,3-1/2” pump ,4” pump ,4-1/2” pump), to meet different requirements of the pressure and displacement.

3.Packing optional components, valve train, exhaust flange, sinks, such as sunction pipes in order to adapt to and meet the needs of different media and different environment

4.The use of bias-type structure, so that the size of pumps to reduce weight.

5.Main components: bearings, piston, seals, crankshaft W, springs, all imported cases

技术支持:中企动力   版权所有:南京雅珑石化装备有限公司  苏ICP备10220097号-1  技术支持:志卓股份
地址:南京市江宁区淳化工业园   邮编: 211122 电话号码:025-86665308  025-86166871  传真号码:025-86166830

柱塞高压泵,五柱塞泵,海水淡化泵,高压往复泵,高压泵厂家,高压泵,二氧化碳泵,超高压清洗机 友情链接:高压泵 | 酒店一次性用品 | 宁波国际海运费 | 肇庆电缆桥架 | 膜厚仪 | 无铅锡膏 | 抛丸机价格